How To Apply Your Sticker

So you got your shiny new stickers and can’t wait to stick em’ on huh?
Here’s some step by step directions on how to apply your new stickers! 
  1. Surface preparation is key! Wipe down the surface with isopropyl alcohol is recommended (Do not use window cleaner or soap as it contains residue that will prevent the sticker from adhering properly.) Ensure the surface is clean from any dirt, debris and any oils. Ensure surface is dry.
  2. Peel off backing tape - Hold down the decal facing downwards on a flat clean surface. (Rear of decal should be facing towards you) SLOWLY Peel away the backing paper at a 45 (or less) degree angle. (If the sticker is stuck to the backing tape, slowly reverse the backing paper back down and rub and push down the part of the sticker that is stuck back into the transfer tape.) then repeat start of this step. 
  3. Once backing tape has been removed position and slowly lower the sticker onto the surface and rub it down in place with a card or squeegee.
  4. Once the sticker tacked down and in position. SLOWLY remove the clear transfer tape at 45 (or less) degree angle.